bitness plan

ok, tonight's plan -
set the base AFRs - 11.5, 12.0, and 12.5 are the targets
make note of the temp, in F
once the static lookup tables are achieving the target AFR, subtract 5 deg of timing from the timing map in the load cells that are typical for a pull. then increment 1 deg of timing each pull. compare each deg in VDR to determine at what point it's not useful to add a deg of timing.

again, do this for the three different AFRs.

should be at least 20 pulls. probably this is a week's worth of work but it's important to do it an night so that temp variation isn't as different from pull 1 to pull 20.